Printer Service Parts from Computronics.
Call CEI for pricing and availability: 770.484.7150
C3094A
C4118A
C4120A
Part
Description
|
|
HP LaserJet 4000 Printer Service Parts from Computronics. Call CEI for pricing and availability: 770.484.7150 |
C3094A |
HP LaserJet 4000 | |
C4118A |
HP LaserJet 4000 | |
C4120A |
HP LaserJet 4000N | |
| Part Number | Part |
Description |
| Toner cartridge drive rod | ||
| Power switch actuator rod | ||
| Serial cable adapter - 9-pin (M) to 25-pin (F) | ||
| Laser shutter arm | ||
| Paper tray sensing arm | ||
| Tray 1 retaining arm | ||
| Tray 1 paper sensor actuator arm and cover | ||
| Delivery sensor arm assembly | ||
| Reversible base assembly - Used in the lower position when one 500-sheet tray is installed on the LaserJet, or the upper position when two 250-sheet trays are installed - The print-to-mail accessory sits on this base | ||
| Transport roller bearing - (Two used) | ||
| Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it | ||
| Separation roller bushing | ||
| Engine test button - Manual test button | ||
| Power switch button | ||
| Cable assembly - 3-pin (F) connectors on each end - 10.0cm (3.9in) long - Tray 1 sensor cable | ||
| Cable assembly - Large 6-pin (F) connector to both a 6.5cm (2.6in) grounding cable with a ring terminal and a 39.4cm (15.5in) cable with a small 6-pin (F) connector - Paper feed/tray 1 pickup solenoid cable | ||
| Envelope feeder connector and cable | ||
| Cable assembly - A 6-pin (F) connector to both a 21.3cm (8.4in) cable with a 3-pin (F) connector and a 27.2cm (10.7in) cable with a 3-pin (F) connector - Top cover interlock access switch cable | ||
| Feed/registration sensor assembly cable | ||
| Cable assembly - A 38-pin (F) connector to a 14cm (5.5in) ribbon cable with a 26-pin (F) connector, a 20cm (7.9in) ribbon cable with a 10-pin (F) connector, and a 34.6cm (13.6in) 2 wire cable with a 2-pin (F) connector - Formatter/control panel cable | ||
| Main motor cable | ||
| Paper feeder module cable | ||
| Optical sensor cable | ||
| Paper feeder cable | ||
| Cable assembly with ferrite - A 13-pin (F) connector, a 6-pin (F) connector, a 4-pin (F) connector, and three 3-pin (F) connectors - 38.4cm (15.1in) long - Laser scanner and output bin paper sensor cable | ||
| IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles (replacement for C2950A) | ||
| IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles (replacement for C2951A) | ||
| Interface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors - Will also need kit for Macintosh | ||
| RS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long - For connecting Apple Macintosh with LocalTalk/serial connector | ||
| RS-232C serial cable - 9-pin (M) to 9-pin (F) - 3.0m (9.8ft) long - Connects to computer that has a 9-pin (M) serial port | ||
| RS-232C serial cable - 9-pin (M) to 25-pin (F) - 3.0m (9.8ft) long - Connects to computer that has a 25-pin (M) serial port | ||
| IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long | ||
| IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long | ||
| IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles | ||
| IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles | ||
| Black toner (EP) cartridge - With 'Micro-Fine' toner - Has standard capacity toner (Prints approximately 6, 000 pages) | ||
| Black toner (EP) cartridge - With 'Micro-Fine' toner - Has standard capacity toner (Prints approximately 6, 000 pages) | ||
| Black toner (EP) cartridge - With 'Micro-Fine' toner - Has maximum capacity toner (Prints approximately 10,000 pages) | ||
| Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills | ||
| Left side panel retainer clip | ||
| Right side panel retainer clip | ||
| E-ring clip - For the transport roller | ||
| Separation roller clutch - Torque limiter | ||
| Lower tray connector and cable | ||
| Feed drive assembly connector | ||
| 250/500 sheet feeder connector - Between frame and printer | ||
| Control panel - Does not include overlay | ||
| Coupler kit - Contains pickup roller coupler, four paper tray load limit clips and installation instruction sheet | ||
| Separation roller/gear coupler | ||
| EIO slot cover - Installs on formatter boards without JetDirect PCA | ||
| Dust cover - For use with models featuring a standard 1X500 paper tray | ||
| Dust Cover - Used on Models With Standard 1X500 Paper Tray | ||
| Dust cover - For use with models featuring standard 2X250 paper trays | ||
| Dust Cover - Used on Models With Standard 2X250 Paper Trays | ||
| Dust cover - For use with optional 500-sheet feeder on LJ4000/4050/4100 models using 1X500 or 2X250 paper trays | ||
| Dust cover - For use with optional 500-sheet feeder on LJ4000/4050/4100 models using 1X500 or 2X250 paper trays | ||
| Main cooling fan cover | ||
| Rear fuser cover panel | ||
| Formatter board cover panel | ||
| Feeder PC board cover | ||
| Top cover - Duplexer access top cover | ||
| Duplexer rear cover panel | ||
| Right side duplexer cover | ||
| Envelope feeder drive cover | ||
| Left side duplexer cover - With connector | ||
| Plate cover | ||
| Right front cover assembly - Mounts bedie the formatter panel | ||
| Left side cover assembly - Includes panel retainer clip | ||
| Right side feeder cover | ||
| Feeder cover left side - Tray 2 | ||
| Tray 1 door assembly kit - New style pull-out tray with extension and new spring - Includes instructions | ||
| 20GB EIO hard drive - LaserJet EIO font/print job storage - Used as replacement for 2.1GB and 3.2GB drives when used in a LaserJet | ||
| Print drive gear assembly | ||
| Optional 500 sheet paper pickup drive assembly | ||
| Delivery drive assembly | ||
| Duplexer assembly - (C4123A) | ||
| Duplexer assembly - For two sided printing | ||
| Envelope feeder assembly - (C4122A) | ||
| Power envelope feeder - Holds 75 envelopes | ||
| Main cooling fan | ||
| Tubeaxial fan - 24VDC - Mounts on the rear of the duplexer assembly | ||
| Paper feed assembly | ||
| Rubber foot - Replacement rubber foot for the bottom of the printer (four used) | ||
| Right side frame assembly | ||
| Left side frame assembly | ||
| Fusing assembly - 110 volts | ||
| Fusing assembly - 220 volts | ||
| Separation roller drive gear | ||
| Coupler gear | ||
| Interlock switch support ground strap | ||
| Gear plate ground strap | ||
| Registration assembly grounding plate | ||
| Paper guide kit - Includes paper guide and guide support for 500 sheet feeder | ||
| Bottom cable guide | ||
| Gear assembly plate cable guide | ||
| Formatter/control panel cable guide | ||
| Optional lower cassette support guide | ||
| Paper feed guide assembly | ||
| Module attachment screw - Long screw with shoulder at bottom | ||
| Feed module screw - M3 x 16mm | ||
| Fusing roller - Heating element and film sleeve - 110V | ||
| Fusing roller - Heating element and film sleeve - 220V | ||
| Cable holder | ||
| Toner cartridge sensing spring retainer | ||
| Pickup roller spring hook | ||
| Level indicator - Small oval button on front left side of tray - Moves vertically to show amount of paper in tray | ||
| Sheet insulator - Plastic sheet between PCA and metal plate | ||
| Ethernet 10Base-T (RJ-45) EIO network internal print server PC board - Ethernet 10Base-T (RJ-45) EIO Network PCA | ||
| Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA - Ethernet 10Base-T/10Base2 & LocalTalk (RJ-45, BNC, LocalTalk) EIO Network PCA | ||
| JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors | ||
| JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers | ||
| JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors | ||
| HP JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector - Includes software on CD-ROM and manual | ||
| JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual | ||
| Laser/scanner assembly | ||
| Rear output tray - Drop down release latch | ||
| Tray size sensing lever assembly | ||
| Arm lifter - White plastic arm that holds top left side metal corner piece up when loading paper in tray | ||
| Arm lifter - White plastic arm that holds top right side metal corner piece up when loading paper in tray | ||
| This is a special part number - Do not remove it or alter the description - Tray 1 separation pad is only available with Tray 1 paper pickup assembly | ||
| LaserJet 4000 series Maintenance kit (120V) - Includes (new) 120VAC fusing assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide | ||
| Maintenance kit (220V) - Includes (new) 220VAC fusing assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide | ||
| Maintenance kit (120V) - Includes exchange 120VAC fusing assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide | ||
| Maintenance kit (220V) - Includes exchange 220VAC fusing assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide | ||
| Maintenance kit (120V) - Includes (new) 120VAC fusing assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide | ||
| Maintenance kit (220V) - Includes (new) 220VAC fusing assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide | ||
| LaserJet 4000 series service manual | ||
| Additional self-paced training guides (English) - Pack of 5 | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (French) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Italian) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (German) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Spanish) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Dutch) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Danish) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Finnish) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Norwegian) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Swedish) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Portuguese) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Polish) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Turkish) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Traditional Chinese) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Korean - Hangul) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Russian - Cyrillic) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Hungarian) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Czechoslovakian) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Simplified Chinese) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Thai) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Arabic) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Greek) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Hebrew) | ||
| LaserJet 4000/4050 series manual bundle - Includes user's manual, 'Getting Started' guide, and pocket quick reference guide (Japanese) | ||
| 4MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module | ||
| 8MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module | ||
| 16MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module | ||
| 2MB flash DIMM memory - Font storage device | ||
| 4MB flash DIMM memory - Font storage device | ||
| 8MB Traditional Chinese MROM DIMM - For LaserJet printers | ||
| 8MB simplified Chinese MROM DIMM - For LaserJet printers | ||
| 8MB, 100-pin SDRAM DIMM memory module | ||
| 16MB, 100-pin SDRAM DIMM memory module | ||
| 32MB, 100-pin SDRAM DIMM memory module | ||
| Main motor assembly | ||
| Envelope mount - Pivotal holder for envelope weight | ||
| LaserJet 4000 control panel overlay (English) |
||
| LaserJet 4000 control panel overlay (French) | ||
| LaserJet 4000 control panel overlay (Italian) |
||
| LaserJet 4000 control panel overlay (Portuguese) |
||
| LaserJet 4000 control panel overlay (Norwegian) |
||
| LaserJet 4000 control panel overlay (Hungarian) |
||
| LaserJet 4000 control panel overlay (Swedish) |
||
| LaserJet 4000 control panel overlay (Polish) |
||
| LaserJet 4000 control panel overlay (Russian) |
||
| LaserJet 4000 control panel overlay (Czechoslovakian) |
||
| LaserJet 4000 control panel overlay (Korean) |
||
| LaserJet 4000 control panel overlay (Simplified Chinese) |
||
| LaserJet 4000 control panel overlay (Traditional Chinese) |
||
| LaserJet 4000 control panel overlay (German) |
||
| LaserJet 4000 control panel overlay (Spanish) |
||
| LaserJet 4000 control panel overlay (Danish) |
||
| LaserJet 4000 control panel overlay (Dutch) |
||
| LaserJet 4000 control panel overlay (Greek) |
||
| LaserJet 4000 control panel overlay (Finnish) |
||
| LaserJet 4000 control panel overlay (Turkish) |
||
| LaserJet 4000 control panel overlay (Hebrew) |
||
| LaserJet 4000 control panel overlay (Arabic) |
||
| LaserJet 4000 control panel overlay (Japanese) |
||
| LaserJet 4000 control panel overlay (Thailand) |
||
| Formatter board assembly |
||
| Engine controller board - Provides all power supply and motor control functions, including power switch - 110 volts - Does not include insulator sheet or bottom metal plate |
||
| Engine controller board - Provides all power supply and motor control functions - 220 volt - Does not include insulator sheet or bottom metal plate | ||
| Feeder controller board - Paper Size detection - Feeder Controller Board | ||
| Lower tray logic PCA - With tray size switches | ||
| JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector - (J3111A) - NOTE: EIO interface boards are NOT interchangeable with MIO boards | ||
| JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO Slots on selected DesignJet and LaserJet printers (Part of J4135A) | ||
| Separation pad for Tray 1 pickup assembly | ||
| Tray 1 separation pad is only available with Tray 1 paper pickup assembly | ||
| Toner cartridge access panel | ||
| Separation roller access panel | ||
| Left duplex access panel - Covers the left duplexer mount | ||
| Right duplex access panel - Covers the right duplexer mount | ||
| Paper delivery assembly | ||
| 500 sheet paper pickup drive assembly | ||
| Tray 1 paper pickup assembly - Complete assembly including pickup roller, separation pad, sensor arm, retaining arm and drive solenoid - Separation pad is not available separately | ||
| Adjustable paper length stop plate | ||
| Cover plate - Metal bottom plate that attaches to the engine controller PC board | ||
| Control panel ground plate - Metal clip that provides the ground connection for control panel | ||
| Pre-transfer ground plate assembly | ||
| Coupler gear mounting plate | ||
| Lower base plate - Bottom plate of 500 sheet feeder | ||
| Tray identifier plunger - Identifies tray number installed | ||
| Power cord (Flint Gray) - 2.3m (7.5ft) long - Has 90 degree (F) receptacle (for 220V in Europe, Saudi Arabia, South Africa, and India) | ||
| Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has 90 degree receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan) | ||
| Power supply module - 100-240VAC input, 50-60Hz - 24VDC output, 2.7A, 65 watts - Includes detachable AC power cord for use in North America (flat blade, polarized, ungrounded) - Part of C7833A | ||
| AC power receptacle - Connector and housing assembly | ||
| Paper pickup roller (D-shaped) - Sold individually | ||
| Fusing assembly pressure roller | ||
| Feed/separation roller - Roller is gray with blue tab protruding out one side | ||
| Pickup roller assembly | ||
| Tray 1 pickup roller assembly - D-shaped roller with blue shaft lock latch | ||
| Transfer roller assembly - Long metal shaft with Black roller and drive gear - Transfers static charge to the media being printed on | ||
| Registration assembly | ||
| Paper path roller kit - Includes pickup D rollers (8 each) , Feed/Separation rollers (4 each) and Tray 1 pickup roller (1 each) - Installation procedure requires use of service manual | ||
| Registration and feed sensors assembly - Includes PS102/103 | ||
| Photo-sensor (TLP1241) - Sensor flag activated - | ||
| Belt drive shaft | ||
| HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English) | ||
| HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French) | ||
| HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish) | ||
| HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian) | ||
| Tray 1 paper pickup drive solenoid | ||
| Separation roller mounting assembly | ||
| Toner cartridge drum ground spring | ||
| Toner cartridge sensing spring | ||
| Laser shutter spring - Provides tension for laser shutter | ||
| Leaf spring | ||
| Rear tray latch release spring | ||
| Left side frame leaf spring | ||
| Tension spring - Provides tension for pickup roller | ||
| Tray lock spring | ||
| Compression spring for tray identifier plunger | ||
| Paper stop spring - Provides tension for tray plate stop | ||
| Upper fold chute stop - Used to set the position of the upper fold on the paper (or form) - Has '1-4' fold indicators - Inserts in the top of the print-to-mail accessory | ||
| Lower fold chute stop - Used to set the position of the lower fold on the paper (or form) - Has 'A-D' fold indicators - Inserts below the output bin slot on the print-to-mail accessory | ||
| Tray paper stop - Locks paper length plate in slot | ||
| Paper stop for 500 sheet tray | ||
| Left side top cover support | ||
| Right side top cover support assembly | ||
| Top cover interlock access switch | ||
| Self-paced training kit for LaserJet 4000 - Includes NTSC video, service manual bundle, user manual bundle, and five additional student guides | ||
| Self paced training kit for laser jet 4000 family - Includes NTSC format video (VHS) and five student guides | ||
| HP LaserJet 4000/4000N Series universal paper tray - Letter to A5 size paper - This is the 500 sheet removeable tray ONLY - NOT the feeder assembly | ||
| 500 sheet tray - Letter/legal/A4 sizes - Paper cassette | ||
| 500 sheet universal paper tray assembly - This is ONLY the tray that holds the paper, NOT the optional feeder assembly (C4124A) that the printer sits on - Holds A5 to\Legal size paper - Replaces C3122A Tray | ||
| Output bin (Exit tray) - Holds the folded paper output - Can be adjusted for legal size forms, or the extendable portion can removed for large mailings (output drops into box) - Mounts to the rear of the pint-to-mail accessory | ||
| 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into | ||
| Rear output tray | ||
| Rear output tray pull-out extension | ||
| Envelope feeder input tray | ||
| Paper input tray (Tray 1) - Multi-Purpose tray assembly | ||
| 500-sheet paper feeder and tray/cassette - This is the frame and tray that the printer sits on top of | ||
| 500-sheet paper feeder and tray/cassette - This is the frame and tray that the printer sits on top of | ||
| Envelope weight - Provides tension for proper feeding | ||