Printer Service Parts from Computronics Enterprises, Inc.
Call CEI for pricing and availability: 770.484.7150.
Q2431A
Q2432A
Q2433A
Q2434A
Q2435A
Q2448A
Part
Description
|
|
HP LaserJet 4300 Printer Service Parts from Computronics Enterprises, Inc. Call CEI for pricing and availability: 770.484.7150. |
Q2431A |
HP LaserJet 4300 | |
Q2432A |
HP LaserJet 4300N | |
Q2433A |
HP LaserJet 4300TN | |
Q2434A |
HP LaserJet 4300DTN | |
Q2435A |
HP LaserJet 4300DTNS | |
Q2448A |
HP LaserJet 4300DTNSL | |
| Part Number | Part |
Description |
| Toner cartridge arm - Mechanical link between main drive assembly and toner cartridge release mechanism | ||
| the lower frame - Provides a positive stop when the front door is |
Front door stop arm - Thin plastic arm between the front door and opened | |
| Bushing - On right side of paper pickup drive assembly | ||
| Feed roller shaft bushing - Bushing on right side of printer that supports the feed roller shaft. | ||
| Top Cover cable - From top cover microswitch (SW101) to DC Controller board | ||
| Tray 2 paper pickup sensor cable assembly - Connects to sensors PS101 and PS107 | ||
| Fuser cable - Main fuser cable for LaserJet 4300 series | ||
| Interface cable assembly - Connects between the 6-pin interface connector and the feeder control board - Mounts on the right side of the 1,500 sheet paper feeder assembly | ||
| Media size sensor cable assembly - Connects between the paper size sensor assembly and the feeder control board - Mounts on the right side of the 1,500 sheet paper feeder assembly | ||
| Front door sensor cable - Connects between the sensor in the feeder lifter drive assembly and the feeder control board - Mounts on the right side of the 1,500 sheet paper feeder assembly | ||
| Sensor cable assembly - For 500 sheet feeder assembly | ||
| AC cable - Low voltage power supply (LVPS) to fuser power supply cable | ||
| DC Controller to fuser safety circuit, high voltage power supply (HVPS), electrostatic transfer belt (ETB) | ||
| Top bin full sensor cable | ||
| Control panel cable | ||
| Memory cable - From DC Controller board to the toner cartridge wireless memory contact tag | ||
| Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector | ||
| Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector | ||
| IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long - (replacement for C2950A) | ||
| IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long - (replacement for C2951A) | ||
| IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long | ||
| IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long | ||
| HP Monochrome LaserJet 4300 Print Cartridge | ||
| Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills | ||
| E-Type retainer ring - Holds paper feed assembly gear | ||
| Accessory cable/connector - Connector for stacker and stacker/stapler accessory at top right rear of printer | ||
| Cable and connector on top right rear of 500 sheet feeder assembly | ||
| Cable and connector on bottom right rear of 500 sheet feeder assembly | ||
| 6-pin connector and housing assembly - Interconnects the optional paper feeder assembly with the host printer - Mounts on top of the right side of the paper feed assembly | ||
| Control panel assembly | ||
| Inner right front cover | ||
| Left side cover panel | ||
| Formatter board cover | ||
| Top rear cover of printer - Removes for Stapler/Stacker installation | ||
| Lower rear cover - Covers rear of standard 500 sheet tray | ||
| Duplexer slot cover - Removable lower rear cover for Duplexer attachment slot | ||
| Envelope cover - Plastic piece above Tray 1 pickup roller | ||
| Left side cover for 500 sheet paper feeder assembly | ||
| Right side cover for 500 sheet paper feeder assembly | ||
| Cover plate - Plastic cover on right front corner of 500 sheet feeder tray - Covers removable tray number designator plate | ||
| Right side cover assembly - For the 1,500 sheet paper feeder assembly | ||
| Left side cover assembly - For the 1,500 sheet paper feeder assembly | ||
| Rear cover assembly - Box type cover for the rear of the 1,500 sheet paper feeder assembly | ||
| Rear output tray assembly - Includes upper rear paper output tray and cover | ||
| Right side cover assembly | ||
| Top cover assembly - Top paper output tray and top of printer | ||
| Front cover - Drop down Tray 1 | ||
| Cartridge access door cover for LaserJet 4250/4350 family | ||
| Front cover (or door) - Provides access to load paper in the 1,500 sheet paper feeder assembly | ||
| Main drive assembly - Main gear assembly on right side of printer | ||
| Paper pickup drive assembly - Gear assembly on right front side of 500 sheet paper feeder assembly | ||
| Paper pickup drive assembly - Includes the drive gears and solenoid mounted on a bracket assembly - Mounts toward the top of the right side frame on the 1,500 sheet paper feeder assembly | ||
| Lifter driver assembly - Includes the three drive gears, swing arm, tension spring and door open sensor - Mounts toward the bottom of the right side frame on the 1,500 sheet paper feeder assembly | ||
| Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers |
||
| Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers | ||
| Cooling fan on left side of printer - FN101 | ||
| Cooling fan on right side of printer - Print cartridge fan - FN103 | ||
| Paper feed sensor flag for Tray 1 | ||
| Paper size sensing flag - White plastic arm used as mechanical link to tray size sensor PC Board - Three used per sensing assembly | ||
| Paper sensor flag for Tray 2 paper pickup assembly | ||
| Refurbished fuser assembly for LaserJet 4300 series - Bonds toner to paper with heat - For 100 to 127VAC operation |
||
| Refurbished fuser assembly for LaserJet 4300 series - Bonds toner to paper with heat - For 220 to 240VAC operation |
||
| Fuser assembly for LaserJet 4300 series - Bonds toner to paper with heat - For 100 to 127VAC operation | ||
| Fuser assembly for LaserJet 4300 series - Bonds toner to paper with heat - For 220 to 240VAC operation | ||
| 18-tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly | ||
| 30-tooth gear - Black plastic gear that attaches to paper feed assembly clutch | ||
| 18 tooth gear - Located on right side of printer in the 500 sheet tray paper pickup assembly | ||
| Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability | ||
| Paper level sensor gear assembly - | ||
| Right side Tray 2 paper cassette guide | ||
| Support guide - Supports right rear side of power supply board | ||
| DC Controller flat cable guide | ||
| DC Controller board cable guide | ||
| Paper feed belt guide for left side | ||
| Paper feed belt guide for right side | ||
| Guide for scanner cable 1 | ||
| Guide for scanner cable 2 | ||
| Connecting cable guide - Routes and protects all cables running from top portion of printer to the DC controller board | ||
| Alignment guide rib - Duplexer skew countermeasure | ||
| Paper sensor flag holder | ||
| Paper pickup arm - Pickup and feed roller holder for Tray 2 paper pickup assembly | ||
| Paper pickup arm holder - Holder for pickup roller shaft | ||
| Thermistor holder - Plastic inside half of thermistor holder | ||
| Thermistor holder - Metal outside half of thermistor holder | ||
| LaserJet 4300 series name plate kit - Includes all model labels for LaserJet 4300 series and one HP jewel label used on drop down Tray 1 | ||
| Laser/scanner assembly | ||
| Laser scanner shutter lever - Four used | ||
| Tray 2 lifter drive assembly - Provides lift support for paper tray | ||
| Tray lifter drive assembly - Lifts paper tray as paper is used in 500 sheet tray | ||
| LaserJet 4300 maintenance kit - (120V) - Includes refurbished fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions | ||
| LaserJet 4300 maintenance kit - (120V) - Includes refurbished fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
||
| LaserJet 4300 maintenance kit - (220V) - Includes refurbished fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
||
| LaserJet part list booklet - Covers LaserJet 1005, 1010, 1012, 1015, 1200, 2300, 3300mfp, 4100mfp, 5000, 5100, 8150 and 9000 series printers - Volume I - This is only listing of service parts for these printers | ||
| LaserJet quick reference service guide (monochrome) - Volume IV | ||
| LaserJet 4200/4300 combined product family service manual | ||
| 128MB, 100-pin SDRAM DIMM memory module | ||
| Main motor - Motor on front right side of printer - M101 | ||
| Toner cartridge motor - Motor M102 | ||
| Control Panel Overlay (Spanish) |
||
| Formatter board assembly |
||
| Paper feeder assembly PC Board - PC Board on right side of 500 sheet paper feeder assembly | ||
| DC controller board - DC Controller for LaserJet 4300 series | ||
| Feeder control PC board - Mounts on the right side of the 1,500 sheet paper feeder assembly | ||
| Tray 1 paper separation pad | ||
| Paper feed belt assembly | ||
| Pickup drive assembly for Tray 2 | ||
| Power cord (Flint Gray) - 18 AWG, 1.8m (6.0ft) long - Has 90 degree (F) C13 receptacle (For 120VAC in the United States, Canada, Latin America, Korea, Taiwan, and Thailand) | ||
| Power supply assembly - 110V |
||
| Power supply assembly - 110VAC | ||
| Power supply assembly - 220V | ||
| Metal rod between external power button and switch on power supply board | ||
| Tray 1 pickup roller - D-shaped roller under envelope cover | ||
| Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24 tooth white gear on one side - | ||
| Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder - For Tray 2 and 1500 sheet feeder | ||
| Transfer roller assembly - Long black spongy roller - Transfers charge to paper | ||
| Paper feed roller assembly | ||
| Paper delivery assembly - Paper output roller assembly | ||
| Registration roller assembly | ||
| M4X10 Phillips screw with broad flat washer head - Sheet metal thread | ||
| Screw - 6 mm Phillips head screw with attached washer | ||
| Paper size sensor block - Spring loaded block which activates the paper size sensor fingers - Mounts on the inside frame of the 1,500 sheet paper feeder assembly | ||
| Tray 2 paper size tray sensing assembly - White plastic tray size sensing fingers and microswitch assembly | ||
| Paper sensor assembly - Includes the support tray with the paper stack surface and paper detection sensors, associated sensor flags, and cable assembly - Mounts on the bottom of the paper pickup assembly (top deck of the 1,500 sheet paper feeder assembly) | ||
| Paper size sensor assembly - Includes the three size fingers, micro-switch assembly and housing assembly - Mounts on the outside of the right frame assembly (in the lower rear corner) | ||
| Photo-sensor (TLP1241) - Sensor flag activated - | ||
| Feeder roller shaft - Axel for Tray 2 feed roller | ||
| Left side shutter assembly - Blocks light from scanner on left side |
||
| Right side shutter assembly - Blocks light from scanner on right side |
||
| Paper pickup solenoid | ||
| Tray 1 solenoid - Engages Tray 1 pickup roller | ||
| Torsion spring | ||
| Tension spring - Provides tension for lifter drive assembly | ||
| Compression spring - Provides pressure for paper pickup and feed rollers in Tray 2 pickup assembly | ||
| Fan cover - Metal support strap that main cooling fan fastens to - For fan FN101, main cooling fan on right left side of printer | ||
| Top cover interlock access switch | ||
| Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up | ||
| Torque limiter - Torque limiter for 500 sheet paper feeder pickup roller | ||
| Paper transfer assembly | ||
| Drop down Tray 1 - Includes adjustable paper width guide assembly | ||
| 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into | ||
| 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of | ||
| Tray 1 paper input assembly | ||