 |
HP LaserJet 5
Printer Service Parts from Computronics Enterprises, Inc. Call CEI for pricing and availability: 770.484.7150. |
|
C3916A |
HP LaserJet 5 | |
C3916A |
HP LaserJet 5N | |
C3916A |
HP LaserJet 5M | |
| Part Number | Part |
Description |
| Serial cable adapter - 9-pin (M) to 25-pin (F) | ||
| Paper out sensor arm - Part of input dual sensor assembly |
||
| Cassette sensor arm - Mounts in the lower cassette base assembly |
||
| Base structure - For the power switch actuator assembly - Does NOT include the power switch |
||
| Tray 1 base assembly - Attachment point for MP input tray |
||
| Timing belt - Timing belt - Between the two holding tray rollers - Goes on the left side of the paper holding area, under the printer, of the duplexer |
||
| Timing belt - Timing belt - On right side of paper output assembly |
||
| Static brush - Mounts to the bottom of the lower feed guide (towards the bottom of the switchback area of the duplexer) |
||
| Static brush - Mounts in the front of the paper holding area (under the LaserJet) of the duplexer |
||
| Brush - Static eliminating - Part of transfer guide assembly |
||
| Power switch button (rocker) - Mounts to switch actuator base - Protrudes through right front bottom of printer |
||
| Sensor cable - From controller PCA to photo sensor PS1 |
||
| Cable assembly - From DC controller to paper control board |
||
| Cable assembly - From DC controller to AC power supply |
||
| Cable assembly - From paper control board to envelope feeder |
||
| Cable assembly - From paper control board to connector for the optional lower cassette sheet feeder assembly |
||
| Cable assembly - 8-pin (F) connector to both a 16.5cm (6.5in) cable with a 4-pin (F) connector and a 22.5cm (8.9in) cable with a ferrite and a 6-pin (F) connector - From DC controller to scanner assembly |
||
| Cable assembly - 7-pin (F) connector on each end - 31.1cm (12.3in) long - From DC controller to laser assembly | ||
| Cable assembly - From DC controller to main motor |
||
| Cable assembly - From DC controller to connector board assembly (for high voltage connector block) |
||
| Cable assembly - From DC controller to delivery sensor (PS3) |
||
| Cable assembly - From DC controller board to control panel |
||
| Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles |
||
| IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles (replacement for C2950A) | ||
| IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles (replacement for C2951A) | ||
| 92215N | Interface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors - Will also need kit for Macintosh LJ 5M only. | |
| 92215S | RS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long - For connecting Apple Macintosh with LocalTalk/serial connector LJ 5M only. | |
| RS-232C serial cable - 9-pin (M) to 9-pin (F) - 3.0m (9.8ft) long - Connects to computer that has a 9-pin (M) serial port | ||
| RS-232C serial cable - 9-pin (M) to 25-pin (F) - 3.0m (9.8ft) long - Connects to computer that has a 25-pin (M) serial port | ||
| IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long | ||
| IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles | ||
| IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles | ||
| Black toner (EP) cartridge - With 'Micro-Fine' toner - Prints approximately 6,800 pages | ||
| Black toner (EP) cartridge - With 'Micro-Fine' toner - Prints approximately 6,800 pages | ||
| Maximum black toner (EP) cartridge - With 'Micro-Fine' toner - Prints approximately 8, 800 pages | ||
| Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills | ||
| Control panel board (with display) - Does NOT include the panel overlay or display window |
||
| Cable cover - Protects cable on right side of duplexer switchback assembly |
||
| Front cover (L-shaped) - Small cover on front of duplexer with arrow on it |
||
| Left cover - Small cover on the left side of the duplexer | ||
| Right cover Small cover on the right side of the duplexer |
||
| Lower rear cover - Small cover under the switchback area of the duplexer |
||
| High voltage cover - Plastic 'Pan' for high voltage board |
||
| Empty slot cover - For option board - Attaches to the I. O. panel |
||
| Cover for gear cluster (Main Drive train) assembly - Attached to the main motor | ||
| Left side cover |
||
| Inner cover plate - Removed when installing envelope feeder |
||
| Right front cover assembly - Includes spring loaded font door | ||
| Right side cover |
||
| SIMM access cover plate - Under the right side cover |
||
| Upper rear cover assembly - Includes paper reversing tray and latch - Large 'box' structure on the rear of the LaserJet (Covering the switchback area of the duplexer) |
||
| Top cover assembly - Includes hinges, top cover, & top door |
||
| Switchback deflector (Shaft with curved deflector fingers) - Attaches to the rear of the switchback guide (in the top of the duplexer) |
||
| Paper deflector assembly (Shaft with curved deflector fingers) - Attaches to the front of the switchback guide (in the top of the duplexer) - Solenoid activated |
||
| MP door - On front panel - Does NOT include tray extension |
||
| Rear door assembly - Includes support strap, latch, and spring |
||
| Lower cassette drive assembly (drive motor and gears) - Mounts in the C3921A lower cassette base assembly |
||
| Duplexer assembly - For two sided printing | ||
| Power envelope feeder - Holds 75 envelopes - (C3927A) |
||
| Power envelope feeder - Holds 75 envelopes | ||
| Tubeaxial fan - Mounts in the upper right rear of the printer |
||
| Tubeaxial fan - Mounts in the top rear of the duplex switchback assembly |
||
| LaserJet printer transparency film - A4 size (21.0cm x 29.7cm) - 50 sheets | ||
| LaserJet printer transparency film - A size (8.5 x 11-inches) - 50 sheets | ||
| Rubber foot - Non-slip replacement rubber foot - Attaches to the bottom of the chassis (five used) | ||
| Rubber foot - Replacement rubber foot for the bottom of the (optional) lower cassette base |
||
| Fusing assembly (For 240V, 50Hz operation) - Bonds the toner to the paper with heat - In quantity price break packaging (Contains five new fusing assemblies) |
||
| Fusing assembly (For 240V, 50Hz operation) - Bonds the toner to the paper with heat - In quantity price break packaging (Contains ten new fusing assemblies) |
||
| Fusing assembly (120V) - Bonds toner to paper by heat | ||
| Fusing assembly (240V) - Bonds toner to paper by heat |
||
| Reduction gear - 40/24 teeth - Reduction gear (40 teeth / 24 teeth) - On the left side of the holding tray in the duplexer assembly - Two used |
||
| Reduction gear - 24/18 tooth - Reduction gear (24 teeth / 18 teeth) - On the left side of the holding tray in the duplexer assembly - Two used | ||
| Reduction gear - 33/20 tooth - Reduction gear (33 teeth / 20 teeth) - On the left side of the holding tray in the duplexer assembly - Two used |
||
| Roller drive gear - 22 tooth - Roller drive gear (22 teeth) - On the right side of the duplexer switchback assembly - Two used |
||
| Drive gear - 32 tooth - Drive gear (32 teeth) - On the right side of the duplexer switchback assembly - Two used |
||
| Reduction gear - 39/22 tooth - Reduction gear (39 teeth / 22 teeth) - On the right side of the duplexer switchback assembly - Two used |
||
| Reduction gear - 54/29 tooth - Reduction Gear (54 Teeth / 29 Teeth) - On the right side of the duplexer switchback assembly |
||
| Fuser drive gear - 19 tooth - Gear (19 teeth) - On right side of fusing assembly |
||
| Fuser output gear - 23 tooth - Gear (23 teeth) - On right side of fusing assembly | ||
| Fusing roller drive gear - 42 tooth - Fusing roller drive gear (42 teeth) - On right side |
||
| Gear cluster (drive train) assembly - Attaches to main motor | ||
| Gear/roller - 18 tooth - On the left side of the holding tray in the duplexer assembly (Four used) |
||
| Switchback guide - Large ribbed piece in the top of the switchback area of the duplexer |
||
| Upper feed guide - Upper curved paper feed guide |
||
| Lower guide - Lower curved paper feed guide |
||
| Paper guide (Plastic piece with ribs) - Guides paper out of tray 1 - Mounts in the paper pickup assembly |
||
| Feeder guide - Ribbed (Gray) metal plate at top of printer |
||
| Left paper cassette support guide - Cassette Guide - Paper Cassette Support Guide - Left Side |
||
| Paper feed guide - Mounts between the upper and lower curved paper guides |
||
| Upper delivery guide - On top of paper output assembly | ||
| Right Cassette Guide (L-Shaped) - Has Hole in Rear for the Power Cord Connector |
||
| Transfer guide assembly - Plate between toner cartridge and fusing assembly | ||
| Transfer guide assembly - Ribbed paper guide for the high voltage transfer roller (Does NOT include transfer roller) |
||
| Roller holder - Pinch roller holder - (Four used) |
||
| Guide roller holder (U-shaped) - In center of paper feed assembly |
||
| Rear paper holder - Attaches to bottom of high voltage cover |
||
| Left latch holder - For MP tray/front door - Mounts in the top left corner of the chassis |
||
| Right latch holder - For MP tray/front door - Mounts in the top right corner of the chassis |
||
| Front paper holder - Attaches to bottom of high voltage cover |
||
| External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors - (part of J2591A, part of J3297A) | ||
| External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors - (part of J2593A) | ||
| External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors - (part of J2594A) |
||
| Infrared transceiver pod - Plugs in empty IR port slot - For wireless interfacing with a IRDA compliant PC or notebook PC - In fared Transceiver Pod (Plugs in Empty IR Port Slot) - For Wireless Interfacing with a IRDA Compliant PC or Notebook PC | ||
| EtherTwist (10Base-T) LAN interface board | ||
| LAN & LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors - LAN & LocalTalk Interface - has EtherTwist (10Base-T), ThinLAN (10Base-2), & LocalTalk (DIN-8) Connectors | ||
| Token ring LAN interface board - DB-9 and RJ-45 connectors | ||
| EtherTwist (10Base-T) or 100Base-TX LAN interface board - Has an RJ-45 connector - EtherTwist (10Base-T or 100Base-TX) LAN Interface Board - has a RJ-45 Connector | ||
| External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors | ||
| External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors | ||
| External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN | ||
| HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN | ||
| JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors | ||
| HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network | ||
| External JetDirect LAN interface module with EtherTwist (10Base-T) connector | ||
| JetDirect 400N modular input/output (MIO) internal print server - Provides token ring network connection using RJ45 or DB9 connectors | ||
| JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector | ||
| LaserJet printer shipping labels - 8.47cm (3.33in) x 10.2cm (4.00in) labels - Six per sheet - 100 sheets per box | ||
| LaserJet printer return address labels - 1.27cm (0.50in) x 4.45cm (1.75in) labels - 80 per sheet - 25 sheets per box | ||
| LaserJet printer file folder labels - 1.69cm (0.67in) x 8.73cm (3.44in) labels - 30 per sheet - 25 sheets per box | ||
| LaserJet printer labels for 3.5-inch diskettes - 7.00cm (2.75in) x 7.00cm (2.75in) labels - Nine per sheet - 70 sheets per box | ||
| LaserJet printer labels for 5.25-inch diskettes - 3.81cm (1.50in) x 10.2cm (4.00in) labels - 12 per sheet - 70 sheets per box | ||
| LaserJet printer full sheet label - A size (8.5 x 11-inches) label - One per sheet - 100 sheets per box | ||
| LaserJet/DeskJet printer labels - 9.91cm (3.90in) x 3.81cm (1.50in) labels on A4 size (21.0cm x 29.7cm) sheet - 14 per sheet - 100 sheets per box | ||
| LaserJet/DeskJet printer labels - 9.91cm (3.90in) x 3.38cm (1.33in) labels on A4 size (21.0cm x 29.7cm) sheet - 16 per sheet - 100 sheets per box | ||
| LaserJet/DeskJet printer labels - 6.35cm (2.52in) x 3.81cm (1.50in) labels on A4 size (21.0cm x 29.7cm) sheet - 21 per sheet - 100 sheets per box | ||
| LaserJet/DeskJet printer labels - 10.0cm (3.94in) x 5.10cm (2.01in) labels on A4 size (21.0cm x 29.7cm) sheet - 10 per sheet - 100 sheets per box | ||
| LaserJet/DeskJet printer labels - 20.0cm (7.86in) x 28.9cm (11.4in) labels on A4 size (21.0cm x 29.7cm) sheet - One per sheet - 100 sheets per box | ||
| Fusing heat lamp (120v, 60Hz) - Located in core of fusing roller |
||
| Fusing heat lamp (240v, 50Hz) - Located in core of fusing roller |
||
| Laser/scanner assembly |
||
| Rear door latch - Latch - Top/center of rear door assembly |
||
| MP tray front door latch - MP Tray front door latch - Mounts in the latch holders in the top of the chassis (two used) |
||
| Top cover interlock lever - Engages switch on paper control board |
||
| Deflector linkage - Connects solenoid (SL1) to duplex switchback paper deflector assembly |
||
| Holding tray linkage - Arm below gears on right side |
||
| This is a special part number - Do not remove it or alter the description - LaserJet Basics Self Paced Training Kit - Includes CD ROM, Quick Reference Guide, Paper Specification Guide, Final Test Instruction Sheet - Go to http://www.hp.com for current pro | ||
| Maintenance kit (120V) - Includes fusing assembly, separation pad, transfer roller, tray 1,2,& 3 pickup rollers and instruction manual |
||
| Maintenance kit (220V) - Includes fusing assembly, separation pad, transfer roller, tray 1,2,& 3 pickup rollers, and instruction manual | ||
| LaserJet 4, 4M, 4+, 4M+, 5, 5M, and 5N printer combined service manual (English) - Also includes installation and service and parts information on the C3157A and C3920A duplexers |
||
| JetDirect network J2552A software configuration guide |
||
| HP jet direct network J2552A installation guide |
||
| LaserJet quick reference guide - Covers Laserjet Classic, II series, III series, 4 series, 5 series, 6 series and 5Si - Volume 1 of 2 volume set |
||
| LaserJet Quick Reference Guide - Covers 1100, 2100, 3100, 4000, 5000 and 8000 series printers - Volume 2 of 2 volume set | ||
| HP-GL/2, PCL5 and PJL technical reference manual kit - HP-GL/2,PCL5 and PJL Technical Reference Manual Kit - Bundle includes PCL and PJL manuals, PCL pocket guide, PCL5 printer comparison guide and PCL5 color tech reference manual | ||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (French) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Italian) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (German) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Spanish) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Norwegian) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Danish) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Portuguese) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Dutch) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Finnish) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Polish) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Swedish) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Traditional Chinese) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Turkey) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Czechoslovakian) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Hungarian) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (Russian) |
||
| LaserJet 5, 5M and 5N printer manual bundle - Includes the user's manual and 'Getting Started' guide (European English) |
||
| 2MB flash SIMM for LaserJet 5 - Used to store special fonts and forms downloaded from the host | ||
| 4MB flash SIMM for LaserJet 5 - Used to store special fonts and forms downloaded from the host | ||
| 16MB SIMM memory module - (C2747A or C3146A) | ||
| 1MB, 32-bit SIMM memory module - (C3130A) | ||
| 16MB SIMM memory module |
||
| External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors - (J2382B) - Note:If replacing the J2382A you must also order manual kit for J2382B | ||
| External token ring interface module - Has DB-9 connector - (J2383B) - Note: If replacing the J2383A you must also order manual kit for J2383B |
||
| External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors - (part of J2590A) | ||
| External JetDirect LAN interface module with EtherTwist (10Base-T) connector - (part of J2592A) | ||
| External JetDirect LAN interface module with EtherTwist (10Base-T) connector - (part of J3258A, J3258B) | ||
| External JetDirect LAN interface module with EtherTwist (10Base-T) connector - (J4102A, J4102B) | ||
| Stepper motor - Mounts in the upper right side in the switchback area of the duplexer |
||
| Rear motor - On the left side of the paper holding area (under the LaserJet) portion of the duplexer |
||
| Front motor - On the left side of the paper holding area (under the LaserJet) portion of the duplexer |
||
| Paper pickup motor - For multipurpose & cassette tray input |
||
| Main motor assembly - On right side of printer | ||
| C3952-40001 | Nameplate - LaserJet 5N printer logo - Mounts on the front of the top cover |
|
| Nameplate - LaserJet 5 printer logo - Mounts on the front of the top cover |
||
| Control panel overlay (English) |
||
| Control panel overlay (French) |
||
| Control panel overlay (Italian) |
||
| Formatter (Main logic) board | ||
| Duplexer controller board - Duplexer Controller Board - Large Board in the Bottom of the Duplexer |
||
| Paper control board - On right side of paper feed assembly |
||
| Sensor board - Narrow board w/ sensors - Sensor Board - Narrow Board w/ Sensors - in Paper Feed Asm |
||
| Interconnect board - Includes cable to A/C power module - Connects DC controller and high voltage power supply to fusing assembly |
||
| DC controller board |
||
| Drive board - Drive Board - In the C3921A Optional Lower Cassette Assembly |
||
| EtherTwist 10Base-T LAN interface board - EtherTwist (10Base-T) LAN Interface Board (J2550A/B) | ||
| Token ring LAN interface board - DB-9 and RJ-45 connectors - Token Ring LAN Interface Board - DB-9 and RJ-45 Connectors (J2555A/B) | ||
| JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors - (J4100A) | ||
| JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector - (J4106A) | ||
| Separation pad (Rectangular) - For multipurpose tray input | ||
| Paper output assembly - Belt driven - | ||
| Paper pickup (Feeder) assembly (Motor driven) - Mounts in the front part of the printer |
||
| Switchback pin - Pivot point of switchback assembly |
||
| Adobe's PostScript (level two) SIMM module - Includes 2MB additional memory and 35 adobe typefaces | ||
| Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) | ||
| Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China) | ||
| Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) | ||
| Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) | ||
| Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark) | ||
| 'Daisy chain' power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output |
||
| Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U. K. and Hong Kong) - For J2592A | ||
| Power module (wall mount) - Input voltage 120VAC, 60Hz - Output voltage 12VDC, 1.25A, 15 watts (USA and Canada) - | ||
| Power module (wall mount)- Input voltage 220-250VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4W (Worldwide) - | ||
| Power module (wall mount, MEI-AH ED12007) - Input voltage 230VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Europe and Israel) - | ||
| Power module (wall mount) - Input voltage 100VAC, 47/63Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Japan) - | ||
| Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker - For serial numbers between ESA5900000 and ESA5A99999 |
||
| Power supply assembly - 220/240VAC |
||
| Power supply assembly - Small board in the bottom right of the duplexer |
||
| Paper exit jam repair kit - Includes upper and lower delivery rollers, output rollers and roller pressure springs - Installation procedure requires service manual |
||
| Power switch rod - From main switch assembly to power supply | ||
| Pinch roller - Top of switchback guide - Four used |
||
| Guide roller - Rollers are not spring loaded - Located in front of switchback guide - Three used |
||
| Paper drive roller (Shaft with four rubber rollers on it) - Mounts in the rear of the switchback area of the duplexer (Rollers extend through cut outs in the rear support frame) |
||
| Paper drive roller (Shaft with four rubber rollers on it) - Mounts in the top center in the switchback area of the duplexer | ||
| Guide roller - In center of paper feed assembly |
||
| Pickup roller (oval shaped) - Located in multipurpose paper tray pickup assembly | ||
| Guide roller - Fits on paper guide/high voltage contact plate - Six used |
||
| Delivery roller - Double roller in paper output assembly - Four used |
||
| Guide roller - Mounts in the lower cassette base assembly |
||
| Fusing roller - Hollow roller - Heat lamp goes in its core |
||
| Lower pressure roller - Hard rubber roller - Located in fusing assembly |
||
| Pickup roller (Quarter circle shaped) - For upper cassette |
||
| Pickup roller - Oval shaped - Located in the (C3921A) Lower cassette base assembly | ||
| Transfer roller - Goes in paper guide/high voltage contact plate assembly | ||
| Lower delivery roller - Shaft with 4 double rollers on it |
||
| Upper delivery roller - Shaft with 7 rollers on it | ||
| Output roller & holder - (Four used) - For facedown paper output |
||
| Roller - Small roller on left side of printer below toner cartridge - Mounted left of small green square tab |
||
| Leading edge registration sensor and PC paper out sensor - Leading edge registration sensor (PS1) and PC paper out sensor (PS2) - In paper pickup assembly (two used) | ||
| Paper exit (Delivery) sensor assembly - Paper exit (Delivery) sensor assembly (PS3) - In rear upper left | ||
| Photo sensor kit - Includes photo sensors PS 1,3,5 and 6 - Photo sensor - For paper registration or delivery sensor | ||
| Photo sensor - Photosensor - One on the right side of the paper holding area (under the LaserJet) and the other on the upper left side in the switchback area of the duplexer -Two used) | ||
| Formatter board EMI shield - Formatter RFI shield - Metal cover over the Formatter Board |
||
| Laser shutter - Attaches to bottom of laser/scanner assembly |
||
| HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English) | ||
| HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French) | ||
| HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish) | ||
| HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian) | ||
| Switchback solenoid - Moves paper deflector - Switchback solenoid - Mounts in the upper left corner of the switchback area of the duplexer - Moves paper deflector |
||
| Pickup solenoid (SL1) - For the paper cassette paper pickup (feed) roller |
||
| Pickup solenoid (SL2) - For multipurpose tray pickup roller |
||
| Delivery roller spring (U-shaped) - Four used | ||
| Switchback tension spring - Provides tension for switchback tray |
||
| Deflector spring - Provides tension for duplex paper switchback paper deflector assembly |
||
| Roller holder spring - Provides tension for pinch roller - Four used | ||
| Deflector spring - Provides tension for switchback deflector at top back of duplexer - Four used |
||
| Spring - For delivery roller holder in paper output - Four used |
||
| Rear door spring - Fits under rear door latch |
||
| Stop plate - For paper length in 250 page universal cassette | ||
| Stop plate - For paper width in 250 page universal cassette |
||
| Stop plate for paper length in 500 page lower cassette |
||
| Support strap for rear door - Supports door when open |
||
| Toner cartridge support - Black plastic bar that attaches above the toner cartridge |
||
| Thermistor assembly - Includes cable - In fusing assembly |
||
| Thermoswitch (fuser temperature switch) - At left of fusing roller - Located in the fusing assembly |
||
| Hook tool - For removing the transfer roller - Stored under the top cover door (towards the front) |
||
| Self paced training kit for LaserJet 4, 4M, 4+, 4M+, 5, 5M, and 5N - Includes service manual, NTSC format video (VHS) |
||
| Self paced training kit for LaserJet 4, 4M, 4+, 4M+, 5, 5M, and 5N - Includes service manual, PAL format video (VHS) |
||
| LaserJet Basics Self Paced Training Kit - Includes CD ROM, Quick Reference Guide, Paper Specification Guide, Final Test Instruction Sheet - Go to http://www.hp.com for current product support information | ||
| Additional self paced training test - Contains 5 tests for the LaserJet 5 series - Also covers the LJ 4, 4+, 4M, and 4M+ |
||
| HP LaserJet 5, 5M, and 5N Multipurpose paper tray (Tray 3) - 500 Sheet Multi-Size Tray - Legal, Letter, Executive and A4 - Holds 500 sheets of letter, legal, Executive, or A4 size paper | ||
| 250 Sheet Multi-Size Tray - Legal, Letter, Executive and A4 | ||
| - Holds 250 sheets of 8.5inch x 11inch letter size paper - 250 Sheet Paper Tray - Holds 250 sheets of 8.5inch x 11inch letter size paper | ||
| HP LaserJet 5, 5M, and 5N A4 paper tray (Tray 2) - Holds 250 sheets of 8.3inch x 11.7inch A4 size paper - 250 sheet paper tray - For 210mm x 297mm A4 size paper | ||
| Multi-Purpose tray extension - MP Tray Extension - Flips out from MP door (Tray) |
||
| Multi-Purpose input tray - Attaches to front door | ||
| Lower cassette upgrade (500 sheet feeder) for LaserJet 5/N/M - With 500 sheet multi-size paper tray | ||
| Weight - Clips on to paper pickup drive shaft of the lower cassette base drive assembly |
||
| Control panel display window/cover - Attaches to the control panel assembly |
||